Winches
Compact Electric Winches

Compact Motor™ Electric Winches - Below Deck

Andersen Compact Motor™ electric winches allow you to hoist and trim sails at the push of a button regardless of physical strength, so any crew member can easily and safely trim sails and control lines.

Ease of installation
The Andersen Compact Motor™ electric winch is available in two formats for either Above Deck or Below Deck motor placement. Motor gearbox and controller are integrated into one compact unit with no extra control box necessary. Simplified electrical installation requires just the connection of positive and negative power cables to the motor terminals and the connection of the push button using the included output cable.

Efficient, variable speed
The Andersen Compact Motor™ is a brushless DC motor carefully matched to a low profile planetary gearbox which requires less space for installation, and draws considerably less current than traditional motor/gearbox configurations. Available in 12 volt and 24 volt models, Compact Motor™ electric winches operate at variable speed in proportion to the pressure applied to the push button, for smooth and quiet operation.

Illuminated "intelligent" push button
Compact Motor™ winches are supplied with a push button with integrated LED which illuminates when power to the winch system is on. The push button incorporates a hinged safety cover to prevent inadvertent winch operation and is water resistant rated to IP67. The push button also acts with the controller to flash status codes that assist with trouble shooting in the event of overload or where other system protection intervention occurs. A cable for connection of the push button is included for convenient installation.

Built-in protection
- Integrated overload protection - The controller is pre-set to stop the winch if the maximum pull load is exceeded. Operation can resume withina few seconds when the load returns below the limit.
- Thermal overload protection - The motor is fitted with a thermal cutout that disables the motor in case of overheating; it automatically resets after the temperature returns to normal.

As with all ANDERSEN Winches™, our Compact Motor™ Electric Winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.

See our technical support section for product manuals and important information regarding Compact Motor™ installation and battery systems

Let our Winch Selection Guide help you find the right winch

Self Tailing Electric Winch Compact Motor - Variable Speed, Below Deck



Product Number RA2028014100 RA2028014200 RA2034014100 RA2034014200 RA2040014100
Model 28 ST FS - Full Stainless, 12 Volt28 ST FS - Full Stainless, 24 Volt34 ST FS - Full Stainless, 12 Volt34 ST FS - Full Stainless, 24 Volt40 ST FS - Full Stainless, 12 Volt
Drum Ø D  (in.) 2 3/42 3/42 3/42 3/42 15/16
Base Ø B  (in.) 4 15/164 15/164 15/164 15/166
Height H  (in.) 6 3/166 3/166 3/165 13/167 1/16
Line Entry L  (in.) 2 7/82 7/82 7/82 7/83 1/8
Line Size  (in.) 5/16-9/165/16-9/165/16-9/165/16-9/165/16-9/16
Weight  (lb.) 37.537.537.537.540
Max Deck Thickness K  (in.) 2 1/82 1/82 1/82 1/82 1/8
Motor Depth J  (in.) 7 1/167 1/167 1/167 1/167 1/16
Motor Ø S  (in.) 7 11/167 11/167 11/167 11/167 11/16

Product Number RA2040014200 RA2046014100 RA2046014200 RA2050014100 RA2050014200
Model 40 ST FS - Full Stainless, 24 Volt46 ST FS - Full Stainless, 12 Volt46 ST FS - Full Stainless, 24 Volt50 ST FS, Full Stainless, 12 Volt50 ST FS, Full Stainless, 24 Volt
Drum Ø D  (in.) 2 15/163 1/23 1/23 1/23 1/2
Base Ø B  (in.) 67 1/167 1/167 1/167 1/16
Height H  (in.) 7 1/167 15/167 15/167 15/167 15/16
Line Entry L  (in.) 3 1/83 9/163 9/163 9/163 9/16
Line Size  (in.) 5/16-9/165/16-9/165/16-9/165/16-9/165/16-9/16
Weight  (lb.) 4046.346.346.346.3
Max Deck Thickness K  (in.) 2 1/82 7/162 7/162 7/162 7/16
Motor Depth J  (in.) 7 1/167 3/87 3/87 3/87 3/8
Motor Ø S  (in.) 7 11/167 11/167 11/167 11/167 11/16

Product Number RA2052014100 RA2052014200 RA2058014100 RA2058014200 RA2062014100
Model 52 ST FS - Full Stainless, 12 Volt52 ST FS - Full Stainless, 24 Volt58 ST FS - Full Stainless, 12 Volt58 ST FS - Full Stainless, 24 Volt62 ST FS - Full Stainless, 12 Volt
Drum Ø D  (in.) 3 15/163 15/164 1/24 1/24 1/2
Base Ø B  (in.) 7 7/87 7/89 1/169 1/169 1/16
Height H  (in.) 8 11/168 11/1610 1/410 1/410 1/4
Line Entry L  (in.) 4 3/164 3/164 3/44 3/44 3/4
Line Size  (in.) 5/16-5/85/16-5/85/16-11/165/16-11/165/16-11/16
Weight  (lb.) 66.266.279.479.479.4
Max Deck Thickness K  (in.) 2 7/162 7/161 7/81 7/81 7/8
Motor Depth J  (in.) 6 7/86 7/86 7/86 7/86 7/8
Motor Ø S  (in.) 9 7/89 7/89 7/89 7/89 7/8

Product Number RA2062014200 RA2068014100 RA2068014200 RA2072014100 RA2072014200
Model 62 ST FS - Full Stainless, 24 Volt68 ST FS - Full Stainless, 12 Volt68 ST FS - Full Stainless, 24 Volt72 ST FS - Full Stainless, 12 Volt 72 ST FS - Full Stainless, 24 Volt
Drum Ø D  (in.) 4 1/25 1/25 1/25 1/25 1/2
Base Ø B  (in.) 9 1/1611111111
Height H  (in.) 10 1/411 3/1611 3/1611 3/1611 3/16
Line Entry L  (in.) 4 3/45 1/85 1/85 1/85 1/8
Line Size  (in.) 5/16-11/163/8-11/163/8-11/163/8-11/163/8-11/16
Weight  (lb.) 79.499.299.299.299.2
Max Deck Thickness K  (in.) 1 7/82 1/162 1/162 1/162 1/16
Motor Depth J  (in.) 6 7/87777
Motor Ø S  (in.) 9 7/89 7/89 7/89 7/89 7/8