Winches
Compact Electric Winches - Above Deck

Compact Motor™ Electric Winches - Above Deck

Andersen Compact Motor electric winches allow you to hoist and trim sails at the push of a button regardless of physical strength, so any crew member can easily and safely trim sails and control lines.

Ease of installation
The Andersen Compact Motor electric winch is available in two formats for either Above Deck or Below Deck motor placement. Motor gearbox and controller are integrated into one compact unit with no extra control box necessary. Simplified electrical installation requires just the connection of positive and negative power cables to the motor terminals and the connection of the push button using the included output cable.

Efficient, variable speed
The Andersen Compact Motor is a brushless DC motor carefully matched to a low profile planetary gearbox which requires less space for installation, and draws considerably less current than traditional motor/gearbox configurations. Available in 12 volt and 24 volt models, Compact Motor electric winches operate at variable speed in proportion to the pressure applied to the push button, for smooth and quiet operation.

Illuminated "intelligent" push button
Compact Motor winches are supplied with a push button with integrated LED which illuminates when power to the winch system is on. The push button incorporates a hinged safety cover to prevent inadvertent winch operation and is water resistant rated to IP67. The push button also acts with the controller to flash status codes that assist with trouble shooting in the event of overload or where other system protection intervention occurs. A cable for connection of the push button is included for convenient installation.

Built-in protection
- Integrated overload protection - The controller is pre-set to stop the winch if the maximum pull load is exceeded. Operation can resume withina few seconds when the load returns below the limit.
- Thermal overload protection - The motor is fitted with a thermal cutout that disables the motor in case of overheating; it automatically resets after the temperature returns to normal.

Important Information
Mounting of an Above Deck Compact Motor winch on a vertical surface is not recommended, as it increases exposure to potential problems of excessive moisture and water ingress which could lead to damage not covered by warranty. The motor/gearbox unit of any Above Deck Compact Motor? Electric Winch is more exposed to the elements than a below deck installation which keeps the motor unit and gearbox more protected. It is important to take reasonable precautions to protect the unit from unnecessary exposure, and carry out regular seasonal maintenance including the lubrification of the motor shaft seal. This is just good seamanship. On commercial and military vessels, it is common to see exposed equipment with electric motors and gearboxes fitted with covers when not in use or to protect them from heavy spray, etc. Equipment on yachts deserves the same proper care.

See our technical support section for product manuals and important information regarding Compact Motor installation and battery systems

Self-Tailing Electric Winches Compact Motor - Variable Speed, Above Deck




Product Number RA2028015100 RA2028005100 RA2028015200 RA2028005200 RA2034015100
Model 28 ST FS - Full Stainless, 12 Volt28 ST - Black Trim, 12 Volt28 ST FS - Full Stainless, 24 Volt28 ST - Black Trim, 24 Volt34 ST FS - Full Stainless, 12 Volt
Drum D  (in.) 2 3/42 3/42 3/42 3/42 3/4
Base B  (in.) 4 15/164 15/164 15/164 15/164 15/16
Height H  (in.) 5 13/165 13/165 13/165 15/165 15/16
Line Entry L  (in.) 5 15/165 15/165 15/165 15/165 15/16
Line Size  (in.) 5/16-9/165/16-9/165/16-9/165/16-9/165/16-9/16
Weight  (lb.) 35.335.335.335.335.3
Max Deck Thickness K  (in.) 1 3/41 3/41 3/41 3/41 3/4
Motor Height J  (in.) 3 3/83 3/83 3/83 3/83 3/8
Motor S  (in.) 7 7/87 7/87 7/87 7/87 7/8
Motor Depth U  (in.) 1 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/16

Product Number RA2034005100 RA2034015200 RA2034005200 RA2040015100 RA2040005100
Model 34 ST - Black Trim, 12 Volt34 ST FS - Full Stainless, 24 Volt34 ST - Black Trim, 24 Volt40 ST FS - Full Stainless, 12 Volt40 ST - Black Trim, 12 Volt
Drum D  (in.) 2 3/42 3/42 3/42 15/162 15/16
Base B  (in.) 4 15/164 15/164 15/16 66
Height H  (in.) 5 15/165 13/165 13/166 13/166 13/16
Line Entry L  (in.) 5 15/165 15/165 15/166 3/166 3/16
Line Size  (in.) 5/16-9/165/16-9/165/16-9/165/16-9/165/16-9/16
Weight  (lb.) 35.335.335.337.537.5
Max Deck Thickness K  (in.) 1 3/41 3/41 3/41 3/41 3/4
Motor Height J  (in.) 3 3/83 3/83 3/83 3/83 3/8
Motor S  (in.) 7 7/87 7/87 7/87 7/87 7/8
Motor Depth U  (in.) 1 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/16

Product Number RA2040015200 RA2040005200 RA2046015100 RA2046005100 RA2046015200
Model 40 ST FS - Full Stainless, 24 Volt40 ST - Black Trim, 24 Volt46 ST FS - Full Stainless, 12 Volt46 ST - Black Trim, 12 Volt46 ST FS - Full Stainless, 24 Volt
Drum D  (in.) 2 15/162 15/163 1/23 1/23 1/2
Base B  (in.) 667 1/167 1/167 1/16
Height H  (in.) 6 13/166 13/167 15/167 15/167 15/16
Line Entry L  (in.) 6 3/166 3/166 7/86 7/86 7/8
Line Size  (in.) 5/16-9/165/16-9/165/16-9/165/16-9/165/16-9/16
Weight  (lb.) 37.537.541.941.941.9
Max Deck Thickness K  (in.) 1 3/41 3/41 3/41 3/41 3/4
Motor Height J  (in.) 3 3/83 3/83 3/83 3/83 3/8
Motor S  (in.) 7 7/87 7/87 7/87 7/87 7/8
Motor Depth U  (in.) 1 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/16

Product Number RA2046005200 RA2050015100 RA2050005100 RA2050015200 RA2050005200
Model 46 ST - Black Trim, 24 Volt50 ST FS, Full Stainless, 12 Volt50 ST - Black Trim, 12 Volt50 ST FS, Full Stainless, 24 Volt50 ST - Black Trim, 24 Volt
Drum D  (in.) 3 1/23 1/23 1/23 1/23 1/2
Base B  (in.) 7 1/167 1/167 1/167 1/167 1/16
Height H  (in.) 7 15/167 15/167 15/167 15/167 15/16
Line Entry L  (in.) 6 7/86 7/86 7/86 7/86 7/8
Line Size  (in.) 5/16-9/165/16-9/165/16-9/165/16-9/165/16-9/16
Weight  (lb.) 41.941.941.941.941.9
Max Deck Thickness K  (in.) 1 3/41 3/41 3/41 3/41 3/4
Motor Height J  (in.) 3 3/83 3/83 3/83 3/83 3/8
Motor S  (in.) 7 7/87 7/87 7/87 7/87 7/8
Motor Depth U  (in.) 1 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/16

Product Number RA2052015100 RA2052005100 RA2052015200 RA2052005200 RA2058015100
Model 52 ST FS - Full Stainless, 12 Volt52 ST - Black Trim, 12 Volt52 ST FS - Full Stainless, 24 Volt52 ST - Black Trim, 24 Volt58 ST FS - Full Stainless, 12 Volt
Drum D  (in.) 3 15/163 15/163 15/163 15/164 1/2
Base B  (in.) 7 7/87 7/87 7/87 7/89 1/16
Height H  (in.) 8 11/168 11/168 11/168 11/169 7/8
Line Entry L  (in.) 7 1/27 1/27 1/27 1/27 11/16
Line Size  (in.) 5/16-5/85/16-5/85/16-5/85/16-5/85/16-11/16
Weight  (lb.) 6464646475
Max Deck Thickness K  (in.) 1 3/41 3/41 3/41 3/41 3/4
Motor Height J  (in.) 3 3/83 3/83 3/83 3/83 3/8
Motor S  (in.) 10 1/1610 1/1610 1/1610 1/1610 1/16
Motor Depth U  (in.) 1 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/16

Product Number RA2058015200 RA2062015100 RA2062015200 RA2068015100 RA2068015200
Model 58 ST FS - Full Stainless, 24 Volt62 ST FS - Full Stainless, 12 Volt62 ST FS - Full Stainless, 24 Volt68 ST FS - Full Stainless, 12 Volt 68 ST FS - Full Stainless, 24 Volt
Drum D  (in.) 4 1/24 1/24 1/25 1/25 1/2
Base B  (in.) 9 1/169 1/169 1/161111
Height H  (in.) 9 7/89 7/89 7/810 3/410 3/4
Line Entry L  (in.) 7 11/167 11/167 11/168 3/168 3/16
Line Size  (in.) 5/16-11/165/16-11/165/16-11/163/8-11/163/8-11/16
Weight  (lb.) 757575112.5112.5
Max Deck Thickness K  (in.) 1 3/41 3/41 3/41 3/41 3/4
Motor Height J  (in.) 3 3/83 3/83 3/83 7/163 7/16
Motor S  (in.) 10 1/1610 1/1610 1/1611 1/811 1/8
Motor Depth U  (in.) 1 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/161 9/16-2 15/16

Product Number RA2072015100 RA2072015200
Model 72 ST FS - Full Stainless, 12 Volt 72 ST FS - Full Stainless, 24 Volt
Drum D  (in.) 5 1/25 1/2
Base B  (in.) 1111
Height H  (in.) 10 3/410 3/4
Line Entry L  (in.) 8 3/168 3/16
Line Size  (in.) 3/8-11/163/8-11/16
Weight  (lb.) 112.5112.5
Max Deck Thickness K  (in.) 1 3/41 3/4
Motor Height J  (in.) 3 7/163 7/16
Motor S  (in.) 11 1/811 1/8
Motor Depth U  (in.) 1 9/16-2 15/161 9/16-2 15/16